Full Depth

Diversity in gaming!

Tag Archives: own

Real Iron Man – The Weaponry


Repulsors

While I am sure that jet packs are being designed to propel the user from the ground, I highly doubt that they are currently also being designed for use as weapons. However, in the film, the repulsors assist in flight, but with a little tweaking, the glove repulsor thrusters and the uni-beam projector at the center of his chest are utilized for yet another use: firepower.

Tony Stark’s ‘repulsor technology’ has not been invented yet in real-life, but we do have particle beam weapons, lasers, and ‘sound bullets’. In real-life there is some technology similar to repulsor rays that are real or even practicable; most, however, are purely science fiction. The repulsor technology (in the film) does not have moving parts, it imparts kinetic force on the target, it charges quickly, there is no visible thermal or chemical damage, they are independent from the rest of the suit, and there is a recoil when they are fired.

A particle beam weapon uses an electromagnetic field generator to focus ionized particles into a centralized sphere of heat and energy. Which, with a sudden reverse of current, can be shot out in an energy-ball type form. This kind of weapon works by disrupting electric circuits and electronic devices in its targets. It can also damage or melt its target by the electrical resistance heating of the target. If living tissue, such as humans or animals, were to be caught by the electrical discharge of an electron beam weapon, they would be most likely electrocuted.

Most of the weapons in Iron Man are real and practical such as the dual arm-mounted 9mm submachine guns, shoulder-mounted minigun, shoulder deployed bunker buster missile launchers, anti-tank missiles, anti-personnel guns in the shoulders, flare launchers on the hips, multi-fire adhesive grenade launcher on the upper arm, and a one-time-use hand-mounted laser weapon added to the various suits shown in the Iron Man films. They would simply have to be added to the armor itself.

Several experimental particle beam weapons were tested at scientific laboratories such as the Los Alamos National Laboratory in New Mexico by both the United States and the USSR from the 1950s to the 1980s. The U.S. Defense Strategic Defense Initiative Organization put into development the technology of a neutral particle beam for strategic defense applications.

Work on a weapon such as this is being developed by Sandia National Laboratories (a portion of Lockheed Martin Co.) in Sandia, New Mexico. Work on a $40 Million Ion Beam Facility at Kirtland Air Force Base has begun. It will house six accelerators; and is scheduled for occupancy this year.

World's Largest Laser

The quest to design a controlled fusion reaction is currently underway at the Lawrence Livermore National Laboratory’s National Ignition Facility (NIF), with scientists reporting that early progress ahead of ignition experiments (which are set to start later this year). The main aim of the world’s largest laser—which is the size of three football fields—is to develop a carbon-free, limitless fusion energy.

Laser-Equipped Robot

The Navy has been testing laser-armed robotic guns for defense against incoming missiles. It has already been used to knock a drone out of the sky. CIWS are generally outfitted with a 20mm Gatling gun, as a ship’s last line of defense against incoming missiles. If they can make the transition to lasers, there are two advantages: first, they do not have to be reloaded; and second, when used on land, there will not be as much shrapnel lying around as they destroy more of the threat than the Gatling guns do.

Sound bullets

At the California Institute of Technology, a team of researchers, in Pasadena think that they have found a way to make sound waves even more powerful with a new type of acoustic lens. It works by generating ‘sound bullets’ that shoot through the air much like a traditional bullet.

Acoustic lenses are used to focus sound in a similar way that an optical lens focuses light. Instead of using glass and mirrors, they designed a acoustic lens that is made of 21 rows of stainless-steel spheres, with each row having its own 21 spheres. By striking the top portion of the lens (the first sphere in each row), it generates acoustic solitary waves so that the researchers can send a compressive wave to each stack or row. These waves are then transmitted into whatever is on the other side of the lens.

Building

Now that you know everything there is to know about the fictional and real-life Iron Man technology, AI, weapons, jet packs, and suits of armor, are you going to learn from these inventors, programmers, and designers and invent/build/design your own. Who knows? You might become the next real Iron Man. Only the future will tell.

Advertisements

Real Iron Man – The Armor


XOS Exoskeleton

The XOS exoskeleton is a powered exoskeleton, which is a powered mobile machine that is worn by a person to perform actions that could not usually be completed without the help of the machine or to protect the user from injury in a hostile environment, created by the company, Sarcos/Raytheon. It allows the user to do two hundred-pound pulldowns easily while only feeling about 10 pounds of the two hundred pounds. Lifting weight with a machine like this is a breeze with the robotic technology that is being utilized in this machine. It also increases the wearer’s reaction time.

The exoskeleton’s built in computer follows and monitor’s the precise movements of the user, borrowing the user’s behavior thousands of times per second. By doing this, the powered exoskeleton amplifies the user’s strength with the help of the robotic exoskeleton. It is powered by an external power supply via a cable.

HAL-5

The HAL (Hybrid Assistive Limb) exoskeleton, also known as HAL-5, is another powered exoskeleton that is being developed by Tsukuba University, a Japanese company.

It is a 33.0693 pound battery-powered suit that monitors the muscle movements of the user’s skin through the electrical signal flow. These signals are sent to the computer which converts it into signals for controlling the motors on the hips and knees of the powered exoskeleton, amplifying the user’s muscle strength up to 5 times their normal strength. It was designed for older work force rather than for military use. A company called Cyberdyne is currently mass-producing the suits.

It is powered by a waist-mounted 100-volt battery pack.

An updated robotsuit version was released more recently that improves the user’s mobility and enables the wearer to carry more weight. It is going to be applied in ADL support for disabled people, heavy labour support at factories, and for rescue support at disaster sites, as well as in the entertainment field.

HULC

HULC which was created by Lockheed Martin is another powered exoskeleton with 4 lithium ion batteries. It can be operated for 48-hours. It allows the wearer to travel 10-miles-per-hour while carrying 200 pounds without hardly even feeling the extra weight. This would allow the soldier to carry more equipment without more strain.

ExoHiker

Other suits like the ExoHiker (pictured above) have been made that allow the lower-body exoskeleton to charge itself through the act of walking using regenerative force; while, at the same time, taking a load of the wearer’s back using only a few watts of power. It was created by Berkeley Bionics.

The Trojan

Troy Hurtubise; a Canadian inventor, outdoorsman, and martial artist, spent his entire family fortune, almost one thousand hours of construction, and twenty-years to develop what he says is a “a suit of armor that can protect the wearer against any attack.” This superhuman suit of armor looks a lot like what you might see in video games and science fiction movies. It has been called the ‘Halo suit’, after the fictional MJOLNIR battle armorMaster Chief wears in the Xbox and PC games.

Ever since he was attacked by a bear, he has been on a quest for invincibility, even consulting physicists, biologists, and zoologists about the exact amounts of force and the dangers a human would face should they be in a bear attack.

This is footage of the suit of armor that he created that was intended to protect the user from bear attacks.

This 40-pound suit, which looks something between a commando, ninja assassin, and Iron Man, is what he calls ‘The Trojan’. “It is the first full exoskeleton ballistic suit of body armor.” This suit features two magnetic hip holsters for holding a vast array of dangerous weaponry, a small detachable RC vehicle for seeing around corners or away from the user, laser-targeting sensors that are set to the user’s line of sight, a five-way-radio, a built-in voice changer, a microphone on the arm for recording last words of dying soldiers, pepper spray that can scatter a mob of at least 40 people, a solar powered air-conditioning unit, and a world clock with 20 time-zones near the crotch area. Underneath the armor itself is a substance that Troy designed called “shadow armor” that can stop any knives, bullets, shrapnel, and explosives. The materials for his armor prototypes that he has built were salvaged from his junk yard business, and composites of his own design. It is powered by helmet-mounted, solar-powered battery packs. $150,000 later, he had his own armor that could protect him from almost any attack. At 5 feet, 8 inches Troy is not a terribly tall guy, but when he wears the armored suit, he towers over everyone at 7 feet, 3 inches. His suit of armor is bulletproof, nightproof, shockproof, and bombproof full body armor.

He began hearing from friends from Iraq and Afghanistan asking if he could find a way to help them survive I.E.D.’s (Improvised Explosive Devices) while having the flexibility and lightness required for the battlefield. He began to look at his earlier designs which were based off of designs from Star Wars and Halo because he believes that the best designs come from creativity, not just engineering prowess.

He has yet to secure a contract with the military, but he has already done real-world testing. Troy has said that he could begin mass producing armor units immediately for only $15,000 dollars once he has military buyers.

He began speaking with professionals in the field including the United States Rangers, Green Berets, and Canadian Special Forces. He told them what he was making, and what they needed that should be a part of the suit. He was interrupted and they gave him numerous ideas, which he used when he went about making the design. He believed that he should speak of their needs for a suit of armor with the soldiers instead of the generals and politicians in order to ensure that his armor would succeed where large military Research and Development budgets had failed. He interviewed every soldier that had been in the war zone that he could find. He was told by a Ranger that the helmet needed to be durable against shots-to-the-head, and that it had to have a coolant system in it while working in high temperatures. A sniper told him that when they are in a ambush situations with sniper fire, only the guy in the front can see where the sniper is, and has no way to signal back the sniper’s location so that he can be taken out. So Troy designed a laser tracking system that is perfectly centered that puts a laser beam along the user’s line of a sight, so a soldier just needs to give the order. He also designed the pepper spray so that a soldier that is out of ammunition still has a way of defense and can retreat from dangerous situations. The Trojan suits represent Troy’s vision of the future soldier, which is more like a walking tank that is intimidating to the wearer’s enemies. It was also intended for use by police officers. Despite his claims concerning its protective capability, it has been criticized by some for being impractical.

The Trojan with Shield

He has stood up in raging bonfires, been burnt alive, beaten with baseball bats, picked fights with bears, been hit by speeding trucks, knocked down by chain-held swinging tree trunks, thrown off of cliffs, and been shot at with double-barreled shotguns and by various military grade weapons all while wearing this extremely durable armor.

Sadly, he went bankrupt after spending most of his money on the advanced suit of armor that he created. Although he did try to sell the prototype of the suit on Ebay, the auction’s reserve bid was not met.

Lifesuit (Prototype 14)

The Lifesuit (Prototype 14) was built by Monty Reed with the idea to replace the wheelchair rather than for use in the military. Monty suffered from a severe back injury after a parachute crash and was told that he would never walk again. So he began his work on the Lifesuit. It is powered by compressed air that allows the suit to move 2.5 miles per hour. Prototype 14 (or LS14), the latest build of the Lifesuit, uses a system of compressed air that automates the process, and also allow the wearer to pick up objects that are as heavy as 200 pounds.

Three versions of the suit are currently being developed; the Home Suit, which is a type of walking wheelchair; the Rescue Suit, which aids workers at disaster sites, allowing them to lift and clear rubble with ease; and the Rehab Suit, which assists everyone from the elderly and paraplegics to train and exercise their bodies.

Arc Reactor

While the power sources of most of these machines are not portable, it is currently impossible to power such machines with the same kind of power that is necessary as Tony Stark’s Arc Reactor which is (in the first Iron Man film) a clean energy source. The ARC Reactor’s energy that is generated by his suit contains even more energy than any existing nuclear power plant. Creating a device as small and as powerful such as this one; if it existed, would solve many of the world’s power problems assuming the materials (if any) could be obtained.

Real Iron Man – The Artificial Intelligence


Jarvis

Chad Barraford, who currently resides in Brookline, Massachusetts, was inspired by the movie Iron Man and decided that he wanted to turn the fictional AI, Jarvis (the speaking AI that allows Tony Stark to monitor his home, workshop, and build his Iron Man armor) into a reality. Using RFID tags, wall speakers, X10 home automation system, xTag wireless microphone, and doing it all using a 4-year-old Mac Mini computer that features built-in speech recognition for $691.98 he did just that.

His digital life assistant (DLA), which he calls “Project Jarvis”, listens and talks to him, monitors his apartment; changes the lighting, AC, and controls his household appliances, and keeps him up-to-date on current events. It gives/sends him real-time weather reports, breaking news, information on his Netflix account, bittorrenting, assistance for cooking, check stock quotes, Facebook notifications, and it even can track his Amazon packages. It can give him notifications about his bills, spending, income, bank fees, unusual spending, etc. Jarvis can also access Chad’s GPS using the Google Latitude service so Jarvis knows where Chad is located.

Not only can he give it commands via Instant Messaging, a remote, or Twitter, but it can also talk back, and recognize Chad’s own voice. This works because of the system that he developed (using the AppleScript programming language) that allows his words to be interpreted through MacSpeech Dictate on his Mac Mini.

Now that you already know all about Project Jarvis, you probably want a DLA yourself. When asked if the product would become available, Chad responded and said that he wanted to develop it to meet his own personal needs, and to create a two-way connection between him and his apartment. He recently stated that he would be releasing Project Jarvis as open source software soon so that it could become developed further by a community of programmers.

So what is Project Jarvis?

Overview of Project Jarvis.

Project Jarvis’s fancy alarm clock and wake up alarm.

Read More:
Projectjarvis.com
YouTube channel

Is this the future of personal computers? is Apple going to jump on this and develop their own DLA? is Microsoft? is Google? only time will tell.

Real Iron Man – The Suit


Ok, by now you probably know that I like the movie Iron Man, but I still have not seen the second movie (how does that work?). So I assume that you probably know now that the title above is a bit misleading, but you really should keep reading…

War Machine

Iron Man Mark VI and War Machine
Iron Man MKV ('Suit case armor')

Anthony Le, a 25-year-old fitness consultant, prop maker, and budding filmmaker who currently resides in Colorado, was inspired by the first Iron Man film and knew he wanted to build his own Iron Man suit. He built the War Machine suit instead of the familiar Iron Man suit because he believed that “it just looks more hardcore”. He also built an advanced replica of the Mark VI that Tony Stark himself wears in Iron Man 2. The design of the Mark VI is similar to the War Machine suit, but it does not feature its own machine gun.

Iron Man

His first suit was more of a costume than his new suit (a version of the War Machine), which was made from materials from Wal-Mart and Home Depot—high-impact urethane, rivets, washers, and a servo motor for the faceplate which is activated from a button inside the chest-plate. He based his design of the War Machine on sketches and concepts of the suit (from the Iron Man 2 movie) that he found on the Internet since the movie had not been released in Theaters at the time that he built it. The rest of the suit was painted silver after it was completed. The helmet mold was made with clay, and the final product was made from a liquid resin mix. The eyes and chest-plate have working LEDs in them. The machine gun, which is mounted on the shoulder, is made from PVC pipes and other materials; it also has a motor and a belt drive which makes it spin much like the real thing at the push of a button (which is located inside one of his gloves). The machine gun could be easily modified to serve as a airsoft or paintball gun. The batteries that power the lights, motor, and servo are located inside the suit’s frame.

After a month and more than $4000 dollars later he had his own ‘War Machine’.

Check out this video of both Iron Man and War Machine (Anthony) fighting masses of invisible enemies.

He also has a zombie version of the War Machine suit.

Read More:
MySpace page
YouTube channel
More information on his work